No products found
Use fewer filters or remove all

5/64 inch id bearings

5/64 Inch ID Bearings Size Chart

5/64 Inch ID Miniature Bearings

Miniature inch-series bearings with a 5/64 inch bore. Chrome steel and stainless steel models are available in standard and flanged configurations.

Type Material Configuration Closure ID (d) OD (D) Width (B) Dynamic Load Static Load Max Speed: Grease Max Speed: Oil Approx. Weight
R 1-4 Chrome steel Standard Open 5/64 in
1.984 mm		 1/4 in
6.350 mm		 3/32 in
2.380 mm		 284 N 96 N 67,000 rpm 80,000 rpm < 1 g
SR 1-4 Stainless steel Standard Open 5/64 in
1.984 mm		 1/4 in
6.350 mm		 3/32 in
2.380 mm		 284 N 96 N 67,000 rpm 80,000 rpm < 1 g
FR 1-4 Chrome steel Flanged Open 5/64 in
1.984 mm		 1/4 in
6.350 mm		 3/32 in
2.380 mm		 284 N 96 N 67,000 rpm 80,000 rpm < 1 g
SFR 1-4 Stainless steel Flanged Open 5/64 in
1.984 mm		 1/4 in
6.350 mm		 3/32 in
2.380 mm		 284 N 96 N 67,000 rpm 80,000 rpm < 1 g
R 1-4-2Z Chrome steel Standard Double shielded 5/64 in
1.984 mm		 1/4 in
6.350 mm		 9/64 in
3.571 mm		 284 N 96 N 67,000 rpm 80,000 rpm < 1 g
SR 1-4-2Z Stainless steel Standard Double shielded 5/64 in
1.984 mm		 1/4 in
6.350 mm		 9/64 in
3.571 mm		 284 N 96 N 67,000 rpm 80,000 rpm < 1 g
FR 1-4-2Z Chrome steel Flanged Double shielded 5/64 in
1.984 mm		 1/4 in
6.350 mm		 9/64 in
3.571 mm		 284 N 96 N 67,000 rpm 80,000 rpm < 1 g
SFR 1-4-2Z Stainless steel Flanged Double shielded 5/64 in
1.984 mm		 1/4 in
6.350 mm		 9/64 in
3.571 mm		 284 N 96 N 67,000 rpm 80,000 rpm < 1 g

Note: The catalogue does not specify the flange outside diameter. The listed OD is the bearing outer diameter.